Lubrication Points
Apply TOHATSU Marine grease to the parts shown
below:
Lubrication interval:
After the first 20 hours or 1 month, then every 100
hours or 6 months (refer to the MAINTENANCE
SCHEDULE on page 58).
Apply anticorrosion oil to pivot
surfaces where grease cannot
penetrate.
Apply corrosion inhibitor to all areas under the engine cover and any exposed metal surfaces except the belts.
PTT THRUST
RECEIVER
(each side)
SWIVEL
SERVICING YOUR OUTBOARD MOTOR
ENGINE
COVER
THROTTLE
LATCH/LOCK
REEL
(each side)
PROPELLER
SHAFT
THROTTLE ARM/
SHIFT ARM SHAFT
SHIFT ARM/
CLICK
ROLLER/
NEUTRAL
SWITCH
TILT SHAFT
TILT LOCK LEVER/
SHAFT CAM
67