Lubrication Points - TOHATSU BFT 200D Owner's Manual

SERVICING YOUR OUTBOARD MOTOR

Lubrication Points

Apply TOHATSU Marine grease to the parts shown
below:
Lubrication interval:
After the first 20 hours or 1 month, then every 100
hours or 6 months (refer to the MAINTENANCE
SCHEDULE on page 85).
Apply anticorrosion oil to pivot
surfaces where grease cannot
penetrate.
Apply corrosion inhibitor to all areas under the engine cover and any exposed metal surfaces except the belts.
94
ENGINE
COVER
LATCH/LOCK
(each side)
PTT THRUST
RECEIVER
(each side)
SHIFT LINK
PIVOT/SHIFT
LINK GUIDE
(DBW type)
PROPELLER
SWIVEL
SHAFT
THROTTLE ARM/
THROTTLE REEL SHIFT ARM SHAFT
(flush-mount type, (flush-mount type,
top-mount type top-mount type
(mechanical wire (mechanical wire
type)) type))
TILT LOCK LEVER/
SHAFT CAM
SHIFT ARM/
CLICK
ROLLER/
NEUTRAL
SWITCH
TILT SHAFT