Overheat Indicator Comes On And Engine Speed Is Limited - TOHATSU BFT 75A Series Owner's Manual

TAKING CARE OF UNEXPECTED PROBLEMS
If using a panel-mount or top-mount
control panel without indicators,
check the indicators displayed on an
NMEA2000-compatible device.
For information about NMEA2000-
compatible device displays, refer to
the display device's manual.
If oil pressure becomes low, the oil
pressure indicator will turn off, and
the engine protection system limits
engine speed. If you are at cruising
speed, engine speed will decrease
automatically.
The oil pressure indicator is also
equipped with a buzzer that sounds
when the oil pressure indicator turns
off.
Low oil pressure may be the result of
a low engine oil level, or there may
be a problem with the engine
lubrication system.
134
If the throttle is closed suddenly after
full throttle operation, engine speed
may drop below the specified idle
rpm, and that could activate the
engine protection system
momentarily.
If low oil pressure activates the
engine protection system, stop the
engine, check the engine oil level
(p.95), and add oil if needed.
With the engine oil at the
recommended level, restart the
engine. If the lubrication system is
OK, the oil pressure indicator should
come on within 30 seconds, and the
engine will respond normally to
throttle control lever operation.
If the engine protection system
remains activated after 30 seconds,
return to the nearest boat landing, and
have the outboard motor inspected by
an authorized TOHATSU dealer.
OVERHEAT INDICATOR
COMES ON AND ENGINE
SPEED IS LIMITED
Remote Control Box:
Side-Mount Type
OVERHEAT
INDICATOR
(RED)
BUZZER