Tiller-Handle - TOHATSU BFT 75A Series Owner's Manual

• If the engine is not properly
warmed up before raising the
engine speed, the buzzer and
overheat indicator may activate
and the engine speed will be
automatically reduced.
• The cooling system may freeze in
areas where the temperature
reaches 32°F (0°C) or below.
Cruising at high speed without
warming the engine up may
cause engine damage.
During the warm-up period, check
the oil pressure indicator (p.42),
overheat indicator (p.43), and
cooling system indicator (p.44).
If using the control panel without
indicators type, check the oil
pressure indicator and overheat
indicator displayed on an
NMEA2000-compatible device.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS on
p.133-136.
6. If the fast idle button was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
OPERATION

Tiller-Handle:

(Tiller Handle)
EMERGENCY STOP SWITCH
EMERGENCY
EMERGENCY STOP
STOP SWITCH
SWITCH CLIP
LANYARD
(Multi-Function Tiller Handle)
EMERGENCY STOP SWITCH
EMERGENCY
EMERGENCY
STOP SWITCH
STOP SWITCH
LANYARD
CLIP
67