Lubrication Points
Apply TOHATSU Marine grease to the parts shown
below:
Lubrication interval:
After the first 20 hours or 1 month, then every 100 hours
or 6 months (refer to the maintenance schedule on page
76).
To prevent corrosion, apply anticorrosion oil to pivot
surfaces where grease cannot penetrate.
Apply corrosion inhibitor to all areas under the engine cover and any exposed metal surfaces except the belts.
SERVICING YOUR OUTBOARD MOTOR
THROTTLE ARM/
LINK/PIVOT/PLATE
PROPELLER SHAFT
LOWER SWIVEL CASE
TILLER HANDLE
(optional equipment)
THROTTLE ROD/LINK
TILT SHAFT
UPPER SWIVEL CASE
87