TOHATSU BFT 75A Series Owner's Manual page 108

Hide thumbs Also See for BFT 75A Series:
Table of Contents

Advertisement

SERVICING YOUR OUTBOARD MOTOR
3. Press down the pressure relief tab,
and then turn the fuel filler cap 1/4
turn counterclockwise. Release the
pressure relief tab. Wait to relieve
pressure.
FUEL FILLER CAP
PRESSURE RELIEF TAB
4. The fuel filler cap will lock again.
Press down the pressure relief tab,
and turn counterclockwise to
remove the fuel filler cap.
106
SAFE FILL LEVEL
Refuel in a well-ventilated area. Fill
the tank to the SAFE FILL LEVEL
line.
PRESS
After refueling, install the cap and
tighten it until you hear it click. Close
the vent by turning the vent knob
clockwise all the way, and return the
fuel tank to the boat.
FUEL FILLER CAP
Using the fuel tank mounted in
the boat.
Check the fuel level and refill if
necessary. Do not fill the fuel tank
above the UPPER LIMIT. Refer to
the boat manufacturer's instructions.
Fuel can damage paint and plastic.
Be careful not to spill fuel when
filling your fuel tank. Damage caused
by spilled fuel is not covered under
warranty.
VENT KNOB
CLOSE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft75a lrt seriesBft90a lrt seriesBft90a xrt seriesBft75a k1Bft90a k1Bft 90a

Table of Contents