Indicators; Alternator (Acg) Indicator - TOHATSU BFT 75A Series Owner's Manual

INDICATORS

The indicator lights come on and the
buzzer sounds when you turn the
ignition switch ON, allowing you to
see that they are working. If an
indicator does not light during this
test, it cannot alert you if that system
develops a problem. Have your
TOHATSU dealer check for burned-
out bulbs or other problems.
Under normal conditions, the
following occur when the ignition
switch is turned ON:
1. The ACG, Malfunction, Oil
Pressure, and Overheat indicators
light.
2. The buzzer will beep twice.
3. The Malfunction, Oil Pressure, and
Overheat indicators will go out
after the second beep.
4. The ACG indicator will go out
after the engine starts.
5. The Oil Pressure indicator will
light again after the engine starts
and will stay lit to indicate the oil
pressure is normal.
If using a panel-mount or top-mount
control panel without indicators,
check the indicators displayed on an
NMEA2000-compatible device.
For information about NMEA2000-
compatible device displays, refer to
the display device's manual.
CONTROLS AND FEATURES

Alternator (ACG) Indicator

Remote Control Box
(side-mount type)
(panel-mount/top-mount types)
ACG INDICATOR
(RED)
BUZZER
ACG INDICATOR
(RED)
BUZZER
41