TOHATSU BFT 75A Series Owner's Manual page 111

HOSE CLIPS
(commercially available)
WATER
SEPARATOR
FUEL HOSES
3. Pinch the fuel hoses with hose clips
to prevent fuel leakage.
SERVICING YOUR OUTBOARD MOTOR
WATER
SEPARATOR
BRACKET
SUSPENSION STRAP
4. Remove the suspension strap from
the water separator bracket; then
remove the strap from the separator
assembly.
During removal of the separator
assembly, take care not to damage
the wire harness with the separator
bracket.
HARNESS
CLIP
WATER
SEPARATOR
5. Open the harness clip and remove
the harness from clip C; then
disconnect the water level sensor 2
pin connector.
6. Disconnect the fuel hoses from the
water separator.
WATER LEVEL SENSOR
2 PIN CONNECTOR
CLIP C
HARNESS
109