SERVICING YOUR OUTBOARD MOTOR
Lubrication Points
Apply TOHATSU Marine grease to
the parts shown below:
Lubrication interval:
After the first 20 hours or 1 month,
then every 100 hours or 6 months
(refer to the MAINTENANCE
SCHEDULE on page 74).
Apply anticorrosion oil to pivot
surfaces where grease cannot
penetrate.
Apply corrosion inhibitor to all areas under the engine cover and any exposed metal surfaces except the belts.
86
THROTTLE ARM/
LINK/PIVOT/PLATE
PROPELLER SHAFT
THROTTLE ROD/LINK
SWIVEL CASE
TILT BRACKET
TILT SHAFT
THRUST RECEIVER