TOHATSU BFT 75A Series Owner's Manual page 78

Hide thumbs Also See for BFT 75A Series:
Table of Contents

Advertisement

OPERATION
1. Move the throttle grip to the
slowest speed and the gearshift
lever or control lever to the N
(neutral) position.
After cruising at full throttle, cool
down the engine by idling for a few
minutes before stopping the engine.
76
Tiller-Handle:
(Tiller Handle)
OFF
IGNITION SWITCH KEY
(Multi-Function Tiller Handle)
OFF
IGNITION SWITCH KEY
2. Turn the ignition switch key to the
OFF position to stop the engine.
In the event that the engine does
not stop when the ignition switch
key is turned to the OFF position,
pull the emergency stop switch
clip out of the emergency stop
switch by pulling the emergency
stop switch lanyard (p.72).
3. When the boat is not in use,
remove and store the ignition
switch key and the emergency stop
switch clip and lanyard. If you are
using a portable fuel tank,
disconnect the fuel hose if you
will be storing or transporting the
outboard motor.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft75a lrt seriesBft90a lrt seriesBft90a xrt seriesBft75a k1Bft90a k1Bft 90a

Table of Contents