TOHATSU BFT 75A Series Owner's Manual page 94

SERVICING YOUR OUTBOARD MOTOR
REGULAR SERVICE PERIOD (3)
Perform at every indicated month or operating
hour interval, whichever comes first.
ITEM
Fuel filter
(Low pressure side)
Fuel filter
(High pressure side)
Fuel tank and tank filter
Fuel line
Thermostat
Battery and cable connection
Bolts and nuts
Breather tube
Cooling water passages
Coolant leak
Water pump
Emergency stop switch
Engine oil leak
Each operation part
Engine condition (5)
Power trim/tilt
Shift cable
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the TOHATSU service manual for service
procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(4) When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
(5) Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
(7) Check the fuel line for leaks, cracks or damage. If it is leaking, cracked or damaged, take it to your servicing dealer for replacement before using your outboard.
(8) Replace the fuel line if there are signs of leaks, cracks or damage.
92
Each use
Check
Replace
Check
Replace
Clean
o
Check
Replace
Check
Check level-tightness
Check-tightness
Check
Clean
Check
Check
Check
Check
Check
Check
Check
Check-adjust
First month
After use or
20 hrs.
(7)
Every 2 years (If necessary) (2) (8)
o
o
(2)
o
(4)
o
o
o
o
o
Every Every year Every 2 years
6 months or or
100 hrs. 200 hrs. 400 hrs.
o
o
(2)
o
o
(2)
o
(2)
o
(2)
o
(4)
o
(2)
o
(2)
o
(2)
Refer
or
to page
111-113
o
-
o
-
(2)
114
-
-
-
-
-
-
-
117
-
52
52
-
-
-
-