TOHATSU BFT 75A Series Owner's Manual page 130

Hide thumbs Also See for BFT 75A Series:
Table of Contents

Advertisement

TAKING CARE OF UNEXPECTED PROBLEMS
ENGINE WILL NOT START
Possible Cause
Battery connections loose or corroded.
Battery discharged.
Fuse(s) blown.
Spark plugs faulty, fouled, or improperly gapped.
Spark plugs wet with fuel (flooded engine).
Fuel system malfunction, fuel pump failure, ignition
malfunction, stuck valves, starter malfunction, switch
malfunction, or electrical problem in the starting circuit,
etc.
128
Correction
Clean and tighten battery connections.
Recharge battery.
Replace fuse(s) (p.131).
Replace spark plugs (p.100).
Dry and reinstall spark plugs. Start engine with the
throttle open.
Use starting procedure (p.59, 62, 64, 67); if engine still
will not start, then take outboard motor to an authorized
TOHATSU dealer, or refer to the service manual.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft75a lrt seriesBft90a lrt seriesBft90a xrt seriesBft75a k1Bft90a k1Bft 90a

Table of Contents