Wiring; Wiring Connections; Install The Autoboom Node - Raven AutoBoom Installation Manual

Ms condor t-1000 with hystar valve

Hide thumbs Also See for AutoBoom:

Table of Contents

CHAPTER

For wiring connections made outside the cab, apply dielectric silicone grease (P/N 222-0000-006) generously

on both the male and female ends of the connectors. Application of the grease will prevent corrosion to the pins

and wires.

AutoBoom Node Installed (Example Only)

FIGURE 1.

Manual No. 016-0230-102

W iring

C h a p t e r 5

CAUTION

Always connect the power cable as the last

step in the wiring process and verify that the

power leads are connected with the correct

polarity. Reversing power leads can cause

severe damage to the equipment.

Table of Contents