Siemens SIMATIC NET OLM12M Description And Operating Manual page 67

6ZB5530–3AB00–0BA0/01
6.4
Setting the Mode
The mode for channel 2 is set using switches S7 and S8.
The following diagram show the settings for the various modes on channel 2.
(default)
Figure 11: Setting the Mode for Channel 2 (CH2)
The mode on channel 3 is set with switches S4 and S5.
The following diagram shows the settings for the various modes on channel 3.
(default)
Figure 12: Setting the Mode for channel 3 (CH3)
Set the switches using a pointed object.
Copyright Siemens AG 1997
18
SIMATIC NET OLM12M