Siemens SIMATIC NET OLM12M Description And Operating Manual page 48

Note
We would point out that the contents of this product documentation shall not become a part of
or modify any prior or existing agreement, commitment or legal relationship. The Purchase
Agreement contains the complete and exclusive obligations of Siemens. Any statements con-
tained in this documentation do not create new warranties or restrict the existing warranty.
We would further point out that, for reasons of clarity, these operating instructions cannot deal
with every possible problem arising from the use of this device. Should you require further in-
formation or if any special problems arise which are not sufficiently dealt with in the operating
instructions, please contact your local Siemens representative.
General
This device is electrically operated. In operation, certain parts of this device carry a dangerous-
ly high voltage.
WARNING!
Failure to heed warnings may result in serious physical injury and/or material damage. Only
appropriately qualified personnel may operate this equipment or work in its vicinity. Personnel
must be thoroughly familiar with all warnings and maintenance measures in accordance with
these operating instructions. Correct and safe operation of this equipment requires proper
transport, storage and assembly as well as careful operator control and maintenance.
Personnel qualification requirements
Qualified personnel as referred to in the operating instructions or in the warning notes are de-
fined as persons who are familiar with the installation, assembly, startup and operation of this
product and who posses the relevant qualifications for their work, e.g.:
Training in or authorization for connecting up, grounding or labelling circuits and devices or
systems in accordance with current standards in safety technology;
Training in or authorization for the maintenance and use of suitable safety equipment in
accordance with current standards in safety technology;
First Aid qualification.