Caliper Reassembly - Suzuki VZR1800 2007 Service Manual

9-68 CHASSIS

CALIPER REASSEMBLY

Reassemble the caliper in the reverse order of disassembly. Pay
attention to the following points:
• Clean the caliper bores and pistons with specified brake fluid,
especially the dust seal grooves and piston seal grooves.
- Specification and classification: DOT 4
$
* Clean the caliper components with fresh brake fluid
before reassembly. Never use cleaning solvent or
gasoline to clean them.
* Do not wipe the brake fluid off after cleaning the
components.
* When cleaning the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvent such as gasoline, kerosine the oth-
ers.
* Replace the piston seals and dust seals with new
ones when installing them. Apply the brake fluid to
both seals when installing them.
PISTON SEAL
• Install the piston seals as shown in the illustration.
BRAKE CALIPER HOLDER
• Apply SUZUKI SILICON GREASE to the brake caliper holder.
. 99000-25100: SUZUKI SILICONE GREASE
Dust seal
Piston seal
or equivalent
Caliper body