Suzuki VZR1800 2007 Service Manual page 46

Rear brake
The extent of brake pad wear can be checked by observing the
grooved limit line A on the pad. When the wear exceeds the
grooved limit line, replace the pads with the new ones.
(!9-63)
%
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
BRAKE PEDAL HEIGHT
• Loosen the lock nut 1.
• Turn the push rod 2 until the brake pedal height becomes 25
– 35 mm (1.0 – 1.4 in) A below the top of the footrest.
• Tighten the lock nut 1 securely.
& Rear brake master cylinder rod lock nut:
" Brake pedal height A:
Standard: 25 – 35 mm (1.0 – 1.4 in)
BRAKE LIGHT SWITCH
• Adjust the rear brake light switch so that the brake light will
come on just before pressure is felt when the brake pedal is
depressed.
18 N·m (1.8 kgf-m, 13.0 Ib-ft)
PERIODIC MAINTENANCE 2-25