Suzuki VZR1800 2007 Service Manual page 196

• Install a new oil seal to the final gear bearing case with the
special tool.
# 09951-16310: Final gear case oil seal installer
• Apply SUZUKI SUPER GREASE "A" to the lip of the oil seal.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Install the final driven bevel gear bearing to the bevel gear
with the special tool.
# 09951-17010: Final driven gear bearing installer
• Install correct shims (3, 4) to the both sides of the final
driven bevel gear and install the gear to the final gear case.
Shim adjustment ("4-20)
• Apply SUZUKI BOND to the mating surface of the final gear
case and final gear bearing case.
$
Do not block the breather passage when applying
SUZUKI BOND.
& 99000-31140: SUZUKI BOND "1207B" or equivalent
• Apply THREAD LOCK to the final gear case bolts and tighten
them to the specified torque.
) 99000-32050: THREAD LOCK "1342" or equivalent
! Final gear case bolt (M8): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
(M10): 50 N·m (5.0 kgf-m, 36.0 lb-ft)
or equivalent
(M10)
DRIVELINE/AXLE 4-25