Table of Contents
Advertisement
5·9 CHASSIS
CALIPER INSPECTION
Inspect the caliper cylinder wall for nicks, scratches or other
damage.
Inspect the piston surface for any scratches or other
damage.
CALIPER REASSEMBLY AND REMOUNTING
Reassemble and remount the caliper in the reverse order of
removal and disassembly. Pay attention to the following
points:
• Wash the caliper bores and pistons with specified brake
fluid. Particularly wash the dust seal grooves and piston
seal grooves.
~
Specification and classification: DOT 4
I
A
CAUTION
I
*
Wash the caliper components with fresh brake fluid
before reassembly.
*
Do not wipe the brake fluid off after washing the
components.
*
When washing the components, use the specified
brake fluid. Never use different types of fluid or clean-
ing solvent such as gasoline, kerosine or the others.
*
Replace the piston seals and dust seals with new
ones when reassembly. Apply the brake fluid to both
seals when installing them.
• Apply SUZUKI SILICONE GREASE to the caliper axles.
~
99000-25100:
SUZUKI SILICONE GREASE
D
D
Advertisement
Table of Contents
