Suzuki VZR1800 2007 Service Manual page 188

• Remove the bearing with the inner race from the final drive
bevel gear with the special tool.
# 09913-60910: Bearing puller
$
The removed bearing must be replaced with a new one.
NOTE:
If no abnormal noise, the bearing removal is not necessary.
• Remove the washer 0.
• Remove the inner race with the special tool.
# 09913-60910: Bearing puller
$
When replacing the drive bevel gear, replace the driven
bevel gear also, as they must be replaced together.
• Remove the final gear bearing case bolts.
• Remove the final gear bearing case from the final gear case,
by using two 5 mm screws.
DRIVELINE/AXLE 4-17