HEADLIGHT BEAM ADJUSTMENT
The headlight beam can be adjusted both horizontally and verti-
cally if necessary.
• Remove the right and left fasteners.
• Pull the lower part of the headlight upper cover forward 1 to
unhook the lower hooks. Then pull the upper part of the cover
upward to unhook the upper hook.
NOTE:
Stick protection tape on the headlight lens to avoid scratching.
To adjust the beam horizontally
Turn the screw 1 located on the left side of the headlight unit
clockwise or counterclockwise.
To adjust the beam vertically
Turn the screw 2 located on the right side of the headlight unit
clockwise or counterclockwise.
Install the headlight upper cover in the reverse order of removal.
VZR1800N ('08-MODEL) 15- 13