Table of Contents
Advertisement
6.2
CAMERA SENSOR
Camera Sensor Setup allows you to configure basic cameras and sensors/relays on the Fusion Streamer.
1
Select Camera
2
Camera Name
3
Color Adjust
4
Pan/Tilt
5
Frame Rate
6
Audio Mode
7
Sensor Inputs
8
Control Outputs
9
Apply
10
Close
11
Live Buffering
Selects the camera you wish to adjust settings for.
Allows you to label cameras.
Adjust the Brightness, Hue, and Contrast of each camera or reset all cameras to
default.
Displays the camera's current PTZ protocol and opens the PTZ Setup Menu.
Opens the Frame Rate Setup Menu.
Toggles between Mic. (Amplified) and Line In Mode (Not Amplified).
Enables Sensors and adjusts settings for Type, Recording Duration, Sensor Re-trigger
Delay, Output Relay, and Sensor Alarm Duration.
Enables Control Outputs (Relays) and allows scheduling of Relay Events.
Applies Changes to Camera and Sensor Settings.
Closes Setup and returns to the Main Screen Saving all changes.
Allows for live buffering of streaming video, may affect performance depending on
network speed.
6–2
Advertisement
Table of Contents
