Power Supply; External Power Supply - Safran MorphoAccess J Series Installation Manual

®
MorphoAccess J Series – Installation Guide

4. Power supply

External power supply

DOCUMENT SSE-0000077503-04 - M
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED
+12V Positive 12 Volts, power supply
GND Ground power supply
• must comply with CEE/EEC EN60950 standard
• 12 Volts ± 5%
TM
(1 Amp. with Wi-Fi
• could be coming from 12 Volts Wiegand power supply, complying with
the Security Industry Association's Wiegand standard March 1995
For EMC compatibility, in order to be EC and FCC compliant (EN55022, EN
55024, FCC part 15, EN 300330), an axial ferrite bead must be set (1 turn with
WURTH 742 7111 or equivalent) with the 12 Volts supply cable.
®
NOTE: MorphoAccess J Series terminal's power supply can also be provided
by the Ethernet using RJ45 connection (Power Over Ethernet mode).
Do not use POE when the Positive 12 Volts and Ground power supply are
connected.
2011
ARCH
Section 4: Electrical interface
(regulated) 0.5 Amp.
option)
Minimum (peak)
45