Smoked Front Cover Disassembly; Equipment From The Initial Package To Use; Step By Step Procedure - Safran MorphoAccess J Series Installation Manual

Section 3: Installation procedure

5. Smoked front cover disassembly

Equipment from the initial package to use

Step by step procedure

36
• One (1) L-shaped Torx screw driver
1. Remove the two screw rubber caps and unscrew the two M2.5X14 screws
using the L-shaped Torx screw driver (see Figure 3.25).
Figure 3.25: Smoked front cover screws removal
M
ORPHO
®
MorphoAccess J Series – Installation Guide
DOCUMENT SSE-0000077503-04 - M
D - R
OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED
2011
ARCH