Wiring Overview - Safran MorphoAccess J Series Installation Manual

®
MorphoAccess J Series – Installation Guide

1. Wiring overview

DOCUMENT SSE-0000077503-04 - M
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED
Before proceeding, make sure that the person in charge of installation and
connections is properly connected to earth, in order to prevent Electrostatic
Discharges (ESD).
Note that all connections of the MorphoAccess® J Series terminal described
hereafter are of SELV (Safety Electrical Low Voltage) type.
Figure 4.1: Wiring overview
For 6-point and 10-point block connectors wiring, use this tool (not supplied
with the product):
• One (1) Flat tip screw driver (diameter 2,5mm) for block connectors screws
2011
ARCH
Section 4: Electrical interface
41