Safran MorphoAccess J Series Installation Manual page 32

®
Section 3: Installation procedure MorphoAccess J Series – Installation Guide
11. Fix the smoked front cover to the terminal's body using the 2 M2.5X14
screws and the L-shaped Torx screw driver. Plug the 2 screw rubber caps on
top of the 2 M2.5X14 screw heads (see Figure 3.9).
Figure 3.9: Smoked front cover fixing
12. In case of irregular wall textures (roughcast wall), apply a sealing washer
(e.g. silicone) all around the terminal back side to ensure watertightness
between terminal and wall.
24 DOCUMENT SSE-0000077503-04 - M 2011
ARCH
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED