Safran MorphoAccess J Series Installation Manual page 42

®
Section 3: Installation procedure MorphoAccess J Series – Installation Guide
12. Plug the smoked front cover onto the terminal's body, plugging first the top
part and then the bottom part (see Figure 3.23).
Apply pressure on the whole surface of the smoked front cover to make sure it
is correctly plugged. This is necessary to activate the anti-tamper switches and
ensure watertightness.
Figure 3.23: Smoked front cover plugging
34 DOCUMENT SSE-0000077503-04 - M 2011
ARCH
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED