Safran MorphoAccess J Series Installation Manual page 27

®
MorphoAccess J Series – Installation Guide
DOCUMENT SSE-0000077503-04 - M
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED
8. Switch on power supply from electrical source and confirm that the terminal
switches on (checking light from LED indicator and sound from buzzer).
9. At this stage, a USB mass storage key can be plugged into the terminal for
configuration (see Figure 3.3). For more details about product configuration
and setting, refer to MorphoAccess
is completed, remove the USB mass storage key.
Figure 3.3: USB mass storage key plugging
10. Plug the smoked front cover onto the terminal's body, plugging first the top
part and then the bottom part (see Figure 3.4).
Apply pressure on the whole surface of the smoked front cover to make sure it
is correctly plugged. This is necessary to activate the anti-tamper switches and
ensure watertightness.
Figure 3.4: Smoked front cover positioning and fixing
2011
ARCH
Section 3: Installation procedure
®
J Series User Guide. Once configuration
19