Safran MorphoAccess J Series Installation Manual page 43

®
MorphoAccess J Series – Installation Guide
DOCUMENT SSE-0000077503-04 - M
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED
13. Fix the smoked front cover to the terminal's body using the 2 M2.5X14
screws and the L-shaped Torx screw driver. Plug the 2 screw rubber caps on
top of the 2 M2.5X14 screw heads (see Figure 3.24).
Figure 3.24: Smoked front cover fixing
14. In case of irregular wall textures (roughcast wall), apply a sealing washer
(e.g. silicone) all around the mounting spacer back side to ensure
watertightness between mounting spacer and wall.
2011
ARCH
Section 3: Installation procedure
35