AT&T Lucent Technologies PARTNER Plus Installation And Use Manual page 118

Dialing Restrictions and Permmisions
OUTGOING CALL RESTRICTIONS
(p. 3-16)
DIAL #401
DIAL an extension number
DIAL 1= No Restriction
2= Inside (intercom) Only
3= Local (intercom and
local) Only
PRESS [Next Item] to select another
extension
T0LL CALL PREFIX (p. 3-16)
DIAL #402
DIAL 1= 0/1 plus Area Code and
Number
2 = Area Code and
Number Only
SYSTEM PASSWORD (p. 3-16)
DIAL #403
DIAL 4 digits to set the password
DISALLOWED PHONE NUMBER
LISTS (p. 3-16)
DIAL #404
DIAL a list number (1 to 4)
DIAL a list entry (01 to 10)
To add entry:
DIAL the phone number (up to 12
digits)
PRESS [Enter]
PRESS [Remove] to remove a list entry
PRESS [Next Item] to select another
list entry
To program another list:
PRESS [Next Procedure] [Prev Procedure].
enter a new list number, and
repeat above steps
DISALLOWED LIST
ASSIGNMENTS (p. 3-16)
DIAL #405
DIAL an extension number
DIAL a list number
DIAL
1= Assigned
2= Not Assigned
PRESS [Next Item] to program another
list
To program another extension:
PRESS [Next Procedure] [Prev Procedure].
enter a new extension number,
and repeat above steps
Factory Setting
=
EMERGENCY PHONE NUMBER
LIST (p. 3-16)
DIAL #406
DIAL a list entry (01 to 10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS [Enter]
PRESS [Remove] to remove a list entry
PRESS [Next Item] to program
another list entry
ALLOWED PHONE NUMBER
LISTS (p. 3-16)
DIAL #407
DIAL a list number (1 to4)
DIAL a list entry (01 to 10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS [Enter]
PRESS [Remove] to remove a list entry
PRESS [Next Item] to select another
list entry
To program another list:
PRESS [Next Procedure] [Prev Procedure],
enter a new list number, and
repeat above steps
ALLOWED LIST ASSIGNMENTS
(p. 3-16)
DIAL #403
DIAL an extension number
DIAL a list number
T e x t
1= Assigned
2= Not Assigned
PRESS [Next Item] to select another list
To program another extension:
PRESS [Next Procedure] [Prev Procedure].
enter a new extension number,
and repeat above steps
PBX/CENTREX MODE (p. 3-14)
DIAL #721
DIAL 1= Active
2= Not Active
SYSTEM RESET - PROGRAMMING SAVED (p.
IMPORTANT: Using this procedure disconnects any active calls but
retains system settings. Use it only if the system fails to function correctly
after a power failure or a down period.
DIAL #728
Groups
PICKUP GROUP EXTENSIONS
(p. 3-17)
DIAL #501
DIAL an extension number
DIAL
1= Assigned to group
2= Not assigned to group
PRESS [Next Item] to assign another
extension
CALLING GROUP EXTENSIONS
(p. 3-17)
DIAL #502
DIAL an extension number
DIAL 1= Assigned to group
2= Not assigned to group
PRESS [Next Item] to assign another
extension
NIGHT SERVICE BUTTON (p. 3-17)
DIAL #503
DIAL 1= Assigned to ext 10
2= Not Assigned
NIGHT SERVICE GROUP (p. 3-17)
DIAL #504
DIAL an extension number
DIAL 1= Assigned to group
2= Not assigned to group
PRESS [Next Item] to assign another
extension
3-14)
Auxiliary Equipment
FAX MACHINE EXTENSIONS*
(p. 3-17)
DIAL #601
DIAL an extension number
DIAL 1= Assigned
2= Not assigned
PRESS [Next Item] to assign another
extension
*FAX MANAGEMENT (p. 3-17)
To monitor fax machines:
1. Use procedure #601 to identify
fax extensions.
2. Program a lighted button on one
or more system phones with the
fax extension as an Auto Dial
number. Label the button appro-
priately (for example, "FAX 12").
MUSIC ON HOLD (p. 3-17)
DIAL #602
DIAL
1= Active
2= Not Active
HOTLINE (p. 3-17)
DIAL #603
DIAL the hotline extension number
(not ext. 10)
DIAL the alerted extension number
(not the hotline)
To remove the hotline and alert:
PRESS [Remove]
DOORPHONE 1 EXTENSION (p. 3-17)
DIAL #604
DIAL an extension number (12-15,
18-21, 24-27, or 30-33)
DOORPHONE 2 EXTENSION (p. 3-17)
DIAL #605
DIAL an extension number (12-15.
18-21, 24-27, or 30-33)
DOORPHONE ALERT EXTENSIONS
(p. 3-17)
DIAL #606
DIAL an extension number (except
a doorphone extension)
DIAL
1= Not an alert
2=Doorphone 1 alert
3= Doorphone 2 alert
4= Doors 1 and 2
PRESS [Next Item] to select another
extension (up to 5 alert
extensions per doorphone)
ATTENDANT/VMS EXTENSIONS
(p. 3-17)
DIAL #607
DIAL an extension number
DIAL
1= Assigned
2= Not Assigned
PRESS [Next Item] to select another
extension