AT&T Lucent Technologies PARTNER Plus Installation And Use Manual page 73

Manual
Dialing on
Dial Code
System Phone
Feature
Conference
[Feature] [0] [6]
Drop
Privacy
Touch-Tone
[Feature] [0] [8]
Enable
[Feature] [0] [9]
Message Light
On
[Feature] [1] [0]
Message Light
Off
Call Pickup
[Intercom] [6]
Pickup Group
[Intercom] [6] [6]
Group Calling
[Intercom] [7] [0]
Loudspeaker
[Intercom] [7] [1]
Paging
Group Paging
[Intercom] [*] [7] [1]
Group Paging is
not available on
the MLC-6
cordless phone.
= Must be programmed onto a button with a light (see pages 3-22 and 3-23). You cannot dial these features manually.
Table 4-2 Dial Code Features (cont'd.)
4-20 Using Telephones
Manual
Dialing on
What the Feature Does
Standard Phone
Drops the last added outside party from a conference call
Not available
without disconnecting the other parties.
Prevents other extensions who share lines with you from
Not available
joining a call on your phone. To use this feature, you must
first program [Feature] [0] [7] onto a button with a light. Use the
button like a switch; when the light is on, Privacy is on.
If Automatic Extension Privacy—system programming
procedure #304—is programmed for your extension, your
extension will normally be private. However, if you will
sometimes need to have coworkers join your conversations,
you can program Privacy on a button with lights. This will let
you temporarily override Automatic Extension Privacy.
Not available Sends touch-tone signals over a rotary line. Allows you to use
phone services such as "Bank-by-Phone" that require dialing
touch-tone digits. Enter the feature code (or press a pro-
grammed button) at the point in the call when you need
touch-tone signals. The rest of the numbers you dial during
the call will be touch-tone digits.
Turns on the Message light on another system phone.
[#] [0] [9]
Although anyone can use this feature, it is typically used by a
receptionist to let someone know a message is waiting. To
use this feature:
1. Enter the feature code (or press a programmed button)
2. Dial the extension number or press an Auto Dial button.
Turns off a previously lit Message light on another system
[#] [1] [0]
phone. To use this feature:
1. Enter the feature code (or press a programmed button)
2. Dial the extension number or press an Auto Dial button.
Picks up a call ringing at any extension in the system. To use
[6]
this feature:
1. Enter the feature code (or press a programmed button)
2. Dial the extension number or press an Auto Dial button.
Picks up a call ringing at any extension in the Pickup Group.
[6] [6]
To use this feature, enter the feature code (or press a
programmed button).
Simultaneously rings all extensions in the Calling Group. To
[7] [0]
use, enter the feature code (or press a programmed button).
Connects you to the (optional) loudspeaker paging system. See
[7] [1]
page 4-18 for instructions on using a loudspeaker paging system.
Simultaneously voice signals all extensions in the Calling
[*] [7] [1]
Group. To use this feature:
1. Enter the feature code (or press a programmed button).
2. When you hear a beep, begin speaking; your voice is
heard on the speakers of all system phones in the
Group. When someone in the group answers, the call
becomes a normal intercom call between you and the
person who answered.