AT&T Lucent Technologies PARTNER Plus Installation And Use Manual page 76

Fax Machines
Setting Up Fax Machines
Restricting Dialing
from a Fax Machine
This section presents several ways that you can set up and use fax machines to
work with your system. It includes instructions for programming and using a Fax
Management button on a system phone (in order to monitor the status of a fax
machine and transfer calls to it with a single touch), transferring calls to the fax
machine extension, and using an AT&T fax machine's Notify button.
There are many ways to set up fax machines. The following configurations are
basic and easy to use:
Single fax machine. Good for light or moderate fax traffic. This basic setup
uses a published fax number.
Fax machine line saver. Good for light fax traffic, with no need for a
published fax number.
Send and receive fax machines. Good for high volume fax traffic. One
machine sends, the other receives.
You can install both a telephone and a fax machine on the same extension using
an AT&T 267F2 bridging adapter. This lets you receive both voice and fax calls
on the same line (but not at the same time). If you pick up the phone and hear a
fax signal, push the [Start] button on your fax machine and then hang up.
You can use dialing restrictions to restrict calling activity on a fax machine. For
example, you can use the Outgoing Call Restrictions (#401) procedure to
restrict the fax machine to local calls only. For a more detailed discussion of
dialing restrictions, see Chapter 3.
Using Auxiliary Equipment 5-1