OPERATOR'S MANUAL REAR DISC MOWER
KDT 180
KDT 260
KDT 340
KDT 341
6.4. Adjusting the swath width
Swath width is adjusted with swath guides mounted on the 3-point linkage frame of the cutterbar
(Fig. 25).
In order to adjust the guide, the following should be performed (for: KDT 180, KDT 220, KDT 260,
KDT 300, KDT 340):
loosen locknuts (2) and screws (3),
❑
shift the guide arm (6),
❑
tighten screws (3) and locknuts (2),
❑
loosen locknuts (4) and screws (5),
❑
then adjust height and shield angle (1),
❑
tighten screws (5) and locknuts (4).
❑
KDT
KDT 220
KDT 300
Fig. 24. Rotation directions of disks
Disc with the forming drum
Disc without the forming drum
33