Table of Contents
Advertisement
Examples and HowTos
Transferring Phone Software and Media Files
Phone Software
The firmware for OpenStage 15 / 20 T / 30 T / 40 T / 60 T / 80 T can be installed via HiPathMan-
ager SW-transfer at HiPath 3000 and via TSDM at HiPath 4000. For OpenStage 60 T/80 T, it is
also possible to install the software via USB stick. The required procedure is described in this sec-
tion.
Installation Using a USB Memory Stick (OpenStage 60 T/80 T)
Please note that some USB memory sticks will not be indentified as an USB memory stick by the
phone. In such a case, please try another stick type or manufacturer.
Advisable and tested USB memory sticks are:
Description
Kingston DataTrav-
eler USB2.0 1GB
Kingston DataTrav-
eler USB2.0 2GB
Corsair Flash Voy-
ager USB2.0 4GB
PNY Outdoor At-
taché USB2.0 1GB
To install the software, take the following steps:
1.Ensure that the memory stick should contains no other files.
2.Copy the official SW bind (OS_HI_TDM_<version number>.bin) and the file prepare.img
to the root of the USB stick.
3.Remove the USB stick from the PC.
4.Power off the phone.
5.Connect the USB stick with the USB master port of the phone. Depending on the geometry of
you USB stick, you might need a standard USB extension cable to connect the stick with the
phone.
6.Power on the phone. If the phone detects the USB stick correctly, you will see the following out-
put on the LCD:
SLBL: 1.1.0_0013_hs
BOOT:1.3.1_0013_hs_nand128
AUX power detected
USB mass storage device detected
Enter update code: _
7.Enter the update code "0167" using the FPKs. The FPKs are counted from top to bottom: the
topmost FPK represents "0", the lowermost FPK represents "7".
Vendor
Vendor product
number
Kingston DTI/1GB
Kingston DTI/2GB
Corsair
CMFSUB2.0-4GB
PNY
P-FD1GBOUT-BX 3536401506737
EAN
Vendor
ID
0740617086102
0951
0740617090185
13FE
0870584006527
090C
13FE
29
Product
ID
1603
1D00
1000
1A00
Hide quick links:
Advertisement
Table of Contents
