Transferring Calls Directly To The Executive Phone - Unify OpenStage 60/60 G User Manual

Making calls in the team/executive/secretary configuration
Ring Transfer: On
Ring Transfer: Off
Transferring calls directly to the executive
phone
Normally, all calls for the executive are audibly signaled only by the secretary
phone.
You can set audible signaling so calls are only signaled acoustically by the
executive phone or by a second phone assigned to it.
Prerequisite: There is a sensor key programmed with the function "Ring
Transfer" on your phone. The default label is "Ring xfer".
This function is only available for the executive/secretary configuration.
Activating
S
Press the "Ring xfer" key. The LED lights up.
or
v
Open the Service Menu
Select and confirm the option shown.
S
Press the required line key.
or
j
Enter the required trunk number.
Deactivating
R
Press the "Ring xfer" key. The LED goes out.
or
v
Open the Service Menu
Select and confirm the option shown.
S
Press the required line key.
or
j
Enter the required trunk number.
Page 39.
Page 39.
123