Unify OpenStage 10 T Quick Reference Card

Key Layout and Operation
Function Keys
Label strips and transparent
cover
Function keys
Your OpenStage 10 T features three function keys that can be
programmed with functions by the administrator. The status of
a function is shown by the LED on the corresponding function
key.
Audio Keys
-
Decrease speaker volume
+
Increase speaker volume
n
Turn speaker on/off
Save Appointments
You can configure your phone to call you to remind you about
appointments. You must save the required call times. You can
save single or daily recurring appointments.
1. Enter )46
2. Enter a 4-digit time, such as 0845 (= 8.45 a.m.) or 1500 (= 3.00
p.m.)
Using timed reminders
You have saved a reminder and the saved time arrives.
1. Your telephone rings.
2. Lift the handset and replace it again.
If you do not answer the timed reminder, it is repeated
five times and then deleted.
Using your OpenStage
Activating/deactivating "Do not disturb"
If you do not wish to take calls, you may activate "Do not dis-
turb". Internal callers hear the busy tone. External callers are
redirected to the attendant console. The adminstrator is able to
set forwarding destinations for "Do not disturb" so that internal
and external calls can be forwarded. When you lift the handset,
you will hear a continous buzzing tone reminding you that "Do
not disturb" is activated. The attendant can bypass "Do not dis-
turb" and reach you.
For activating:
• Enter )97
For deactivating:
• Enter (97
Lock or Unlock the Phone
You can prevent unauthorized dialing of external numbers or
accessing your mailbox during your absence. You get the corre-
sponding code from the administrator.
For locking:
1. Enter )66
2. Enter code for locking.
For unlocking:
1. Enter (66
2. Enter code for unlocking.
Configure speed-dial keys
You can program the keys 0 to 9 with 10 external phone
numbers.
1. Enter )92
2. Enter )
3. Press the required speed-dial key.
4. First enter the external code and then the external station
number (wait approximately 5 seconds).
Dialing with speed-dial keys
1. Enter )7
2. Enter )
3. Press the required speed-dial key.
OpenStage 10 T
OpenScape Business
HiPath 3000
Quick Reference Card
Copyright © Unify GmbH & Co. KG 06/2014
Hofmannstr. 51, 81379 München/Deutschland
Alle Rechte vorbehalten.
Sachnummer: A31003-S2000-U179-3-7619
unify.com