Maintenance - Yardworks 060-1300-6 Instruction Manual

42
model no. model no.
060-1300-6 060-1300-6
before each Use
Check motor oil level
Clean engine
Check air filter element
Check reduction gear oil
first 2 Hours of break-In Operation
Change engine oil
Check drive belt tension
Check nuts and bolts
every 5 Operating Hours
Check motor oil level
every 10 Operating Hours
Check drive belt tension
Check nuts and bolts
Change engine oil
Lubricate tiller
every first Month or first 20 Hours
Change engine oil
Replace reduction gear oil
Clean air filter element
every 30 Operating Hours
Check gear oil level in transmission
Check tines for wear
Check air pressure in tires (if unit has
pneumatic tires)
* These items should be replaced if replacement needed.
** These items should be maintained and repaired by our authorized dealer, unless the owner has
appropriate tools and is proficient with mechanical maintenance.
NOTICe:

Change the engine oil after the first 2 hours of break-in operation.
–
Change the engine oil more frequently in dusty conditions.
–
| contact us: 1.866.523.5218 | contact us: 1.866.523.5218
every 3 Months or every 50 Hours of
Operation
Change engine oil
Replace reduction gear oil
Replace air filter element
Clean spark arrestor (if applicable)
every year or every 100 Hours of Operation
Clean deposit cup
Check/adjust spark arrester*
Check/adjust idling
Check/adjust valve clearance**
Clean Fuel tank and fuel filter**
every Two years
Check fuel line
every 125 Hours
Clean up carbon from cylinder head piston**