Installing The Tine Shield; Install The Depth Regulator - Yardworks 060-1300-6 Instruction Manual

20
model no.
060-1300-6
INsTAll THe TINe sHIelD
1. Remove the (4) M10×25 mm flange head bolts installed in the tine shield brackets
above the transmission housing.
2. Place the tine shield on the bracket and secure with the bolts removed in step 1.

INsTAll THe DePTH ReGUlATOR

1. Remove the (1) pin and (1) clip from
the depth regulator lever.
2. Insert the depth regulator into the
bottom of the depth regulator bracket.
3. Insert the pin through the bracket and
lever.
4. Install the clip removed in 1 onto the
depth regulator lever.
| contact us: 1.866.523.5218