Spark Arrester Screen Service - Yardworks 060-1300-6 Instruction Manual

60
model no. model no.
060-1300-6 060-1300-6
5. Measure the spark plug clearance with a spark plug gap gauge. The clearance should
be 0.7-0.8 mm. If adjustment is necessary, bend the side electrode carefully.
6. Check if the spark plug gasket is in good condition. To prevent cross-threading, screw
in by hand.
7. Screw in the spark plug first by hand, then use a spark plug wrench to compress the
gasket.
7a. If a new spark plug is used, twist another 1⁄2 turn after compressing the gasket.
7b. If reinstalling a used spark plug, only twist another 1⁄8 to 1⁄4 turn.

sPARK ARResTeR sCReeN seRVICe

If the engine muffler is equipped with a spark arrester screen, remove and clean it
according to the service intervals.
WARNING: Don't touch the muffler when the engine is running or hot.

NOTICe: The spark plug must be tightened securely, or it may

become very hot and damage the engine.
| contact us: 1.866.523.5218 | contact us: 1.866.523.5218