Yardworks 060-1300-6 Instruction Manual page 45

45
model no. | contact us: 1.866.523.5218
060-1300-6
5. If the gear oil level is low, add GL-4 gear oil (SAE 85W-140 or SAE 140).
6. If the gear oil level is okay, securely replace the oil fill plug.
IMPORTANT: Do not operate the tiller if the gear oil level is low. Doing so will result in
severe damage to the transmission components.
B. To Drain the Transmission Gear Oil:
The transmission gear oil does not need to be changed unless it has been contaminated
with dirt, sand or metal particles.
1. Drain gasoline from the fuel tank or run the engine until the fuel tank is empty.
2. Drain the oil from the engine.
3. Remove the left-side wheel.
4. Tilt the left-side wheel shaft into a drain pan and allow the gear oil to drain through the
top of the transmission.
5. Reinstall the wheel.
6. Refill the transmission using GL-4 gear oil (SAE 85W-140 or SAE 140).
7. Refill the engine with engine oil and replenish the fuel tank with gasoline.