Operation; Adding Fuel - Yardworks 060-1300-6 Instruction Manual

OPeRATION

model no.
060-1300-6
INTRODUCTION
Read this section before you start the engine. Then, take the time to familiarize yourself
with the basic operation of the tiller before using it in the garden. Find an open, level area
and practice using the tiller controls without the tines engaging the soil (put tines in "travel"
setting). Only after you've become completely familiar with the tiller should you begin using
it in the garden.
ADD fUel
1. Use clean, fresh, regular unleaded
gasoline with a minimum octane rating
of 85 and an ethanol content of 10% or
less by volume. y b c
2. DO NOT mix oil with gasoline.
3. Remove the gasoline cap.
4. Slowly add gasoline to the tank.
DO NOT OVERFILL.
Gasoline can expand after filling.
A minimum of ¼" (6.4 mm) of space
left in the tank is required for gasoline
expansion although more than ¼" (6.4 mm)
is recommended. Gasoline can be forced
out of the tank as a result of expansion if
overfilled and can affect the stable running
condition of the tiller.
 WARNING: Before operating your machine, carefully read and
understand all safety, controls and operating instructions in this
Operator's Manual.
Failure to follow these instructions can result in serious personal injury.
WARNING: Pouring gasoline too fast through the fuel screen may

result in blow back of gasoline at the operator while filling.
| contact us: 1.866.523.5218
29