Install The Wheels; Install The Tines - Yardworks 060-1300-6 Instruction Manual

model no.
060-1300-6

INsTAll THe WHeels

1. Remove the locking pins from the
wheel hubs.
2. The tiller wheels are directional. For
best performance install the wheels
with the tire thread facing the direction
as shown.
3. Slide the wheel hub onto the wheel
axle.
4. Align the wheel hub hole with the hole
in the axle and insert the locking pin.
5. Rotate the locking pin ring to lock the
pin in position. Repeat on other wheel.

INsTAll THe TINes

1. Check the orientation of the tine blade.
The sharp cutting edge should be
facing the direction of tine rotation for
your tiller.
2. Install the tine assemblies on each tine
axle. Secure with (2) pins and (2) cotter
pins. Bend cotter pins once inserted to
prevent them from coming out.
| contact us: 1.866.523.5218
before Assembly
19