Assembly; Attach Lower Handle - Yardworks 060-1300-6 Instruction Manual

AsseMbly

18
model no. model no.
060-1300-6 060-1300-6
Your tiller requires some assembly. This unit ships from our factory without oil. It must be
properly serviced with fuel and oil before operation.
If you have any questions regarding the assembly of your tiller, call our
Technical Support Team at 1.866.523.5218. Please have your serial number and model
number available.
UNPACKING
1. Remove all parts and packaging components.
2. Remove top lid and remove sides.
3. Remove any remaining packaging.
4. With helper, remove the tiller from the shipping crate.

ATTACH lOWeR HANDle

1. Loosen the lower handle bolts.
2. Align the lower handle holes to the middle height adjustment holes in the transmission
cover and install the (4) M10×25 mm flange head bolts and (4) M10 nuts. Tighten all
hardware.
| contact us: 1.866.523.5218 | contact us: 1.866.523.5218