Yardworks 060-1300-6 Instruction Manual page 55

model no.
060-1300-6
9. Tighten the forward and reverse lower jam nut.
10. Check the belt tension. The belts should be loose with the drive levers disengaged.
11. Replace the upper and lower belt guards.
12. Re-attach the spark plug wire to the spark plug.
13. Follow Operating Instructions – start the engine and operate the forward drive lever to
check for proper cable adjustment and belt tension. See the Belt Tension Adjustment
section if cable adjustment is required.
14. Start the engine and operate the reverse drive lever to check for proper cable
adjustment and belt tension. See the Belt Tension Adjustment section if cable
adjustment is required.
WARNING: The tines or wheels should not rotate with the engine

running, the depth regulator set at transport height (lowest height) and
the drive lever not engaged.
| contact us: 1.866.523.5218
55