Transportation And Storage - Yardworks 060-1300-6 Instruction Manual

model no.
060-1300-6
Transport with the fuel valve turned the "OFF" position. Transport or store the engine when
it is cool to avoid getting burns or starting a fire.
Off-seAsON sTORAGe
When the tiller won't be used for an extended period, prepare it for storage as follows:
1. Make sure the storage area is dry and free of dust.
2. Clean the tiller and engine.
3. Do routine tiller lubrication and check for loose parts and hardware.
4. Turn the fuel valve to "OFF" position, set a proper container under the carburetor.
5. Drain the oil out of the gasoline engine.
6. Remove the spark plug. Place about a spoon of fresh engine oil into the cylinder. Crank
the engine to distribute engine oil evenly.
7. Reinstall the spark plug.
8. Store unit in a clean, dry area.
9. Never store the tiller with fuel in the fuel tank in an enclosed area where gas fumes
could reach an open flame or spark, or where ignition sources are present (space
heaters, hot water heaters, furnaces, etc.)
10. Loosen the oil drain bolt and completely drain the gasoline out of the carburetor into
proper container and screw the oil drain bolt down. Remove the sediment bowl after
closing fuel cock, and completely pour the gasoline out the sediment bowl. Finally
reinstall the sediment bowl back and screw it down.
NOTICe: Do not tilt the engine to avoid fuel spills. Spilled fuel or fuel

vapour may ignite and cause fire.
WARNING: Fuel is extremely flammable and explosive under certain

conditions. Keep smoke, fire and spark away from operating site.
| contact us: 1.866.523.5218
61