Yardworks 060-1300-6 Instruction Manual page 80

80
model no.
060-1300-6
PRObleM
Wheels turn, but
tines don't
Poor tilling
performance
DIffICUlTy sTARTING eNGINe (ReCOIl)
PRObleM
Something
wrong with the
fuel system: fuel
supply is not
smooth or no fuel
supply
| contact us: 1.866.523.5218
POssIble CAUse
Tine holder mounting hardware missing.
Bolt loose in transmission pulley.
Internal transmission wear or damage.
Worn tines.
Improper Depth Regulator setting.
Incorrect throttle setting.
Forward Drive Belt slipping.
POssIble CAUse
There is no enough fuel in fuel tank and
fuel cock is closed.
Air vent in the fuel filler cap is clogged.
Fuel cock is clogged.
Improper or clogged main oil flow hole.
Needle valve is not closed properly or start
hole is clogged.
Float is damaged or sticking.
Fuel is too filthy or deteriorated.
There is water in fuel.
Too much fuel in engine.
Wrong fuel brand.
sOlUTION
Replace hardware.
Tighten bolt.
Contact Technical Support Team.
See "Tines" section.
See "Depth Regulator Lever
Adjustment".
Adjust throttle on engine or speed
control on handle bar to highest
setting.
See "Checking and Adjusting
Forward Drive Belt Tension" or "Belt
Tension Adjustment".
sOlUTION
Fill fuel, open fuel cock.
Dredge air vent.
Clean first and then dredge
Readjust or clean. Blow to get
through.
Dismantle needle valve and repair,
clean. Blow to get through.
Repair float.
Replace.
Replace.
Drain extra fuel. Dry up spark plug
electrodes.
Select proper fuel brand
corresponding with the
requirements.