Assembly - Yardworks 60-3815-0 Owner's Manual

UNPACKING
This product requires assembly.

Carefully remove the tool and any accessories from
the box. Verify that all of the items that are listed in
the packing list are included.

Inspect the tool carefully in order to verify that no
breakage or damage occurred during shipping.

Do not discard the packing material until the tool has
been carefully inspected and satisfactorily operated.

If any parts are damaged or missing,
call 1 866 523-5218 for assistance.
PACKING LIST
Tiller
Battery clip
Battery (pre-installed)
Charger
Wheel pull pin(2)
Tine Hitch pins (2)
Cultivating Tines (4)
Edging wheel (2)
Edging Tine(1)
Wing nuts (4)
Bolts (4)
Battery
Tine hitch pins (2)
Edging wheel (2)
Wheel pull pin (2)
Wing nuts (4)
Battery clip
Battery charger
Cultivating Tines (4)
Bolts (4)
Edging Tine (1)

ASSEMBLY

WARNING:
If any parts are missing, do not operate this tool
until the missing parts have been replaced. Failure
to heed this warning could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or to create
accessories that are not recommended for use
with this tool. Any such alteration or modification
constitutes misuse, and could result in a hazardous
condition that may lead to serious personal injury.
WARNING:
Do not connect the Battey to the power supply
until assembly is complete. Failure to comply could
result in accidental starting, and possible serious
personal injury
Upple handle
Middle handle
Lower Handle
9
Wing nuts
and bolts
Battery clip
Fig. 4