Choosing The Wireless Ip Settings - Cisco WIP310 User Manual

Installing the WIP310
Accessing the Wireless Network
STEP 1
STEP 2
STEP 3
NOTE
Cisco WIP310 User Guide
To switch to a different wireless profile, you need to manually choose it from the
list in your phone:
In the Home screen, press the Select button to display the Settings menu. Press
the Select button again and navigate to the
Press the Select button to view your options. Select Manual Setup to show the list
of configured wireless networks.
Use the Up or Down Arrow key to choose the network you want from the list and
press the Select button.
The phone displays a message if it successfully connects to the wireless network.

Choosing the Wireless IP Settings

By default, your WIP310 phone uses Dynamic Host Configuration Protocol (DHCP).
With DHCP, the router assigns an IP address to your phone. This IP address
assignment is dynamic, meaning that the IP address assigned to your phone can
change.
You can configure the phone with a static, or unchanging IP address.
You should only configure your WIP310 to use a static IP address if you have been
instructed to do so by your ITSP or by another support person.
Wireless Setup
menu.
2
38