Low Limit Value - Datcon DT4220 E Series Operating Instructions Manual

DT4220 E
Function
Sequence of operations Read the chapter 7.1. Functions of the push-buttons during
20180619-V0

7.13.2. Low limit value

The instrument compares the displayed value with this low limit value.
Here you can define the numerical value by which the device will
compare the measured physical values.
[Factory default: 050.00]
navigation in the menu for learning the buttons handle.
1. Enter the menu by typing the supervisor code.
2. Keep stepping by pressing the ▲ button as long as you see this
menu item.
3. Enter the menu item by pressing the Menu button.
4. Type the desired value by using the ▲ and the ► buttons.
5. Exit from menu item by pressing the Esc button. The change is
saved to FRAM.
(6. Press Esc button again if you want to leave the menu.)
41