Menu Item 23: Resetting The Default Settings - Datcon DT4220 E Series Operating Instructions Manual

DT4220 E
Function
Sequence of operations Read the chapter 7.1. Functions of the push-buttons during
20180619-V0

7.22. Menu item 23: Resetting the default settings

In this case all the settings are deleted, and the default factory setting
is restored.
Using this function makes sense in that case, when the settings of the
instrument have changed so much, that it is easier to start the setting-
up process from the default factory setting.
It is not possible to cancel this operation once the command has been
issued.
navigation in the menu for learning the buttons handle.
1. Enter the menu by typing the supervisor code.
2. Keep stepping by pressing the ▲ button as long as you see this
menu item.
3. Enter the menu item by pressing the Menu button.
4. Pressing the ▲ button, select the  (Yes) text.
5. Press the Menu button you see this  (Ready) on the display.
All of the parameters have been set to factory default settings.
After then the instrument restarts.
49